Microtunnelling to relocate underground utilities

To enable construction of Cross River Rail, many existing underground sewer and stormwater pipes need to be relocated. The project will install the new utilities using a construction methodology called microtunnelling. Use of this methodology will allow trains to continue to operate as we install new services under the tracks.

 

What is microtunnelling?

Traditional open-cut trenching involves digging a trench, laying pipe and backfilling the trench. Microtunnelling is a trenchless
method of pipe installation.

This methodology does not require a trench. Instead, two small micro boring machines will be used to dig an underground path, after which specialised hydraulic equipment is used to push lengths of pipe through the ground.

The machines will be selected specifically for the existing geological conditions in the area.

diagram showing how microtunnelling works are spaced underground
Indicative diagram only. Not all microtunnelling will pass underneath train track.

 

How will the new pipes be installed?

The first step is excavating and constructing four temporary concrete shafts, from which the machines will be launched.

The machines are then lowered into the shaft to start each stage between the temporary shafts.

The machines excavate the ground while hydraulic equipment pushes pipe through the ground behind it. These pipes will form the new sewer and stormwater main.

How is the machine steered?

The machines are continually monitored during the pipe installation using a laser inside the jacking pit. As the machine progresses, it can be steered with hydraulic cylinders in the machine to maintain direction.


 

What will happen to excavated material?

Excavated material will be temporarily stored on-site, before it is loaded onto trucks and taken to approved spoil facilities.

Will I notice boring activities?

We are not boring under any residential or commercial buildings.

Residents and businesses closest to the work sites may notice noise from machinery and trucks above ground.

We do not anticipate any impacts to existing services during this time. We will work to minimise impacts from construction as much as possible.

Who do I contact with an enquiry about construction?

For all enquiries or complaints, please use on of the options below:

 

You might also be interested in...

Guide to tunnelling

Guide to tunnelling

Everything you need to know about building Brisbane's new underground

Roadheaders

Roadheaders

These electrically powered tunnelling machines perform the finely-controlled digging needed for station cavern excavation and for the tunnelling from Woolloongabba to Boggo Road.

aerial view of a busy construction site

Works Notices

Check where work has started, what's coming up and how it will impact you.